Based on ARM Cortex TM-3 and compatible 32-bit platform digital storage oscilloscope; Configuration 320 x 240 color display, 8MB memory, USB interface and charging function; Meet the school experiment, appliance repair, electrical engineering basic requirements.
Special Functions
Out site maintenance (AC / DC switching power supply or inverter, elevator and building fire-fighting equipment, industrial control circuit); Hardware maintenance or software debugging RS232, RS485, I2C, CAN and other communications interface circuits, LED display and keyboard scan driver circuit, brushless motor drive circuit; Audio equipment and circuits, electronic toys and remote control models, car repair electronic circuits; Extracurricular school teaching practice and student development of electronic small production; Requires the slow signal changes observed applications (such as: relay and switch contacts jitter, battery charge and discharge curves, power supply load transient response characteristics of the temperature sensor measurements); Power supply for electronic circuit (SCR voltage regulator, power factor compensation, electronic energy saving lamps, dysprosium lamp mercury lamp sodium lamp drive circuit xenon lights, etc.)
LCD Display
2.8" Color TFT LCD
Display Resolution
320 x 240
Analog bandwidth
0~200kHz
Max sample rate
1Msps 12Bits
Sample memory depth
4096 point
Horizontal sensitivity
1us / Div-10S / Div (1-2-5 steps)
Horizontal position
Adjustable
Vertical sensitivity
10mV / Div-10V / Div (X1 probe) 0.5V / Div-10V / Div (X10 probe)
Vertical position
Adjustable with indicator
Input impedance
>500kohm
Display Language
English
Power Supply
550mAh
Other Data
Display Color: 65K; Auto, Norma, Single, None and Scan; Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage; Precise vertical measurement with markers; Precise horizontal measurement with markers; Rising / falling edge trigger; Trig level adjustable with indicator; Trig sensitivity adjustable with indicator; Hold / run feature; Power supply: 3.7V Chargeable Lithium battery / USB; It can continuously work for 2 hours.
Packing List
1 x Oscilloscope 1 x Probe (120cm-cable) 1 x USB cable (100cm) 1 x Sleeve bag 1 x Allen key
Dimensions: 3.58 in x 2.44 in x 0.51 in (9.1 cm x 6.2 cm x 1.3 cm) Weight: 3.56 oz (101 g)
This website uses cookies for the correct display and functionality. Do you also want to take full advantage of the website and accept cookies? About cookies. Accept cookies
