Introduction The 7HP120 is a mini-PLC adapter. It can transmit data up to 200Mbps in the household powerline. It can be connected to the power socket directly without new wire. The 7HP120 adapter can enter power save mode triggered by multiple conditions. It can help you to establish a high-speed network that supports video, voice and data without wiring and drilling. It is suitable for using in a wide range of both residential (at home) and commercial (offices, apartments, hotels, warehouses) network applications. Product Features Without new wiring, every power socket becomes a connection node in the household. Plug-and-play to your routers, computers and other network devices. Provides power save mode. In the power save mode, the output consumption of the device is less than 0.5W. The physical data rate is up to 200Mbps. Application High Definition (HD) and Standard Definition (SD) video distribution Higher data rate broadband sharing for powerline LAN Shared broadband internet access TV over IP (IPTV) and Voice over Internet Protocol (VoIP) Safety Precautions This device is intended for connection to the AC powerline. For installation instructions, please refer to the installation section of this guide. The following precautions should be taken when using this product. Read all instructions before installing and operating this product. Follow all warnings and instructions marked on the product. Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners. Do not operate this product near water. This product should never be placed near or over a radiator or heat register. Do not use an extension cord between the device and the AC power source. Only a qualified technician should service this product. Opening or removing covers may result in exposure to dangerous voltage points or other risks. Do not plug the device into a power strip or surge protector because these devices may consist of filter and impair signal. Avoid plugging the device right next to noisy sources such as cell phone charger, Halogen light, noisy desktop computer, vacuum cleaner, etc. These cases result in poor transmission speed. Unplug the device from the wall outlet and refer the product to qualified service personnel for the following conditions: If liquid has been spilled into the product If the product has been exposed to rain or water If the product does not operate normally when the operating instructions are followed If the product exhibits a distinct change in performance Appendix A Specifications Chipset Atheros QCA6410 Protocol HomePlug AV, IEEE1901 Co-exists with existing HomePlug 1.0 System Support Windows 98SE, 2000, ME, XP 32/64 bit and Vista 32/64bit PLC PHY Rate 200Mbps (Max) Modulation Band 2~68MHz Modulation Schemes Supports OFDM 4096/1024/256/64/16/8-QAM, QPSK, BPSK and ROBO Encryption 128 AES LEDs Power Ethernet Data Push Button Reset: Restore the factory default settings Security: Set the network password automatically Consumption 3W Operating Temperature 0ºC to 40ºC Storage Temperature -20ºC to 70ºC Operating Humidity 10% to 90%, non-condensing Storage Humidity 5% to 95%, non-condensing Input Rating 100-240 VAC, 50/60Hz