Module parameters:
The modular nature:Non-isolated synchronous rectification automatic buck module
Input voltage:DC5-30V
Input Current:8A (MAX) Peak 10A (6A work for a long time)
Quiescent current: 4mA (operating voltage is not the same there will be errors)
Output voltage: 1.25-30V continuously adjustable (the default output 12V, For other voltages please photographed Note.)
Output Current: 10A (MAX) (long natural heat inside 5A) For larger output current, two modules can be used in parallel, such as the output to 10A, two modules can be connected in parallel, the current per module transferred to 5A can.
Output current range: 0.2-10A (default 4A delivery, such as the need for other voltages please photographed Remarks)
Working temperature: -40 to + 85 degrees
Operating frequency: 150KHz
Conversion efficiency: typically 91% (12V turn 12V5A) up to 93%
Overcurrent protection: Yes
Short circuit protection: Yes (limiting protection
Overtemperature protection: (automatically reduce the output voltage after overtemperature)
Input reverse polarity protection: None, (if necessary, please enter the string into the diode)
Output Counter irrigation: Yes, for charging plus blocking diode is not required.
Connection: screw terminal output, (IN is the input, OUT output)
Module size: 60mm * 53mm * 20mm (LWH)
Applications:
This module can be applied to relatively large fluctuations input voltage, output requirements are relatively stable areas. Such as:
1. 12V battery (10-14V) regulated output 12V, 12V to supply power, 24V battery voltage 24V; you can use as a vehicle power supply, drive 12V books and the like.
2. The solar panel regulator, voltage fluctuations relatively large solar panels, this module can regulated output power to the device or to charge the battery to use.
3. driving high-power LED lights, constant current driver, such as a 12V battery drive four LED lights, the LED and the battery voltage or less.