The 2.4 GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN applications. It adopts the direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM) technology of WLAN communication. The product is compatible with time division depleting (TDD) method of WLAN and using Rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi devices and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Key Features:
100% Brand New & Never Used
20X the power improving the link quality and coverage of certified WLAN devices
2.5dB ultra-low noise
Wide 6V to 55V operating input range
Working with certified IEEE 802.11b/g/n Wireless LAN devices
Simply plug and play, no software is required
Specifications:
Frequency Range: 2.4~2.5GHz
Operating Voltage 6~55V
Receiving Gain: 25dB±1
Transmission Gain: 13dB±1
Input Trigger Power: Min: 3dBm Max: 30dBm
Maximum Output Power (P1dB): 37dBm (5W)
EVM:
[email protected] 802.11g 54Mbps OFDM 64QAM BW 20MHz
DC Supply Current:
[email protected] 29dBm 12V
Noise Figure: <2.5dB
TX RX Switch Time Delay: <1us
LED Indicator: Transmitter: green; Receiver: red
Weight: 300g
Dimension: 103.5*96.5*30.5mm
Installation Instructions:
Step1: Disconnect power supply to AP/Router.
Step2: Detach the antenna from your certified wireless AP/Router
Step3: Connect Rg316 cable to the booster and AP/Router
Step4: Connect the antenna to the other end of the booster
Step5: Connect the power supply to the booster first and subsequently the AP/Router