This is the update version of DS201(sku.414652), and DS201 will not be made later;
Features:
DSO mini oscilloscope.
Rising/falling edge trigger.
Compact rectangular housing.
Large display screen.
Buttons on the side.
Mini pocket sized.
Compact and lightweight.
Store file as BMP, DAT, BUF, or CSV format.
Use build-in flash disk to save/read waveform image.
Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp.
Output test signal: 10Hz—1MHz (1-2-5 sequence step).
Synchronous mode: auto, normal, single, none, scan.
Auto measurement: frequency/duty cycle, DC RMS voltage/Vpp /Vmax/Vmin.
Specifications:
Lightweight digital storage oscilloscope.
Coupling: DC/AC.
Max sampling rate: 1 MSa/s.
Analog broadband: 200kHz.
Max sampling memory depth: 8K.
Analog input impedance: 1MΩ.
Max input voltage: ±40Vpp(x1 probe).
Vertical sensitivity: 10mv/Div~10V/Div (1-2-5 sequence step).
Horizontal sensitivity: 1uS/Div~10S/Div (1-2-5 sequence step).
2.8"color TFT LCD display (320×240 pixels).
Recharging through mini USB port.
Internal 500mAh lithium battery.
Application:
- Outdoor Maintenance(AC/DC Power and Inverters, floor fire equippment and circuit-control)
- Hardware maintenance and software debugging RS232�RS485�I2C�CAN and so on circuit, LED display and scanning driver circuit via keyboard
- Audio device and circuit, elecrtic toys and remote models, car circuit maintenance
- School tutoring and DIY electronic-development.
- Somewhere needs to observe the slow signal changes(eg. Relay Module and inch-switch, Battery charge and discharge curve, Temperature sensor measure and so on)
- Power for related circuit.