1, The use of single-chip microcomputer and special software, using special software based on expert control system, realizes the intelligent optimization SOC control.
2, Temperature compensation uses an external temperature sensor, humidity sensor control over the built-in high precision.
3, Overcharge, over discharge, electronic short circuit, overload protection, unique protection against reverse automatic controller: more protection not damage any parts, do not burn insurance.
4, To use series connection PWM circuit, it is 3%-6% more effective than non-PWM circuit when charging. To use float charging control mode to prolong the system life span; with high precision temperature compensation function.
5, With LED to show the battery state .
6, To use industrial grade chip (only for with “I” industrial grade controller), it can work under environment such as cold, high temperature, humid with precise time control.
7, To use Flash memory to keep record of all the working control point, to make the settings digitalized.
8, With LED display and settings, one button can carry out all settings.
9, Built-in super voltage correction procedures to ensure the accuracy of all levels of voltage, charge and discharge process control correctness.
10, With DC discharge or IHZ strobe flash discharge mode which is especially suitable for street lamp control etc.
11, With constant current output can directly drive LED load can be adjusted with a constant output current load power, are subject to change conventional LED light source with a constant current source, the installation more convenient, reserved for more space.
12, Using a large-caliber, high interval terminals can be installed maximum 6mm2 wire, wire spacing 9.5 mm, enhanced insulation and installation reliability, not easy to slide wire.