pecification:
Capacity:1000mAh
Continuous discharge rate: 20C
Voltage: 3.7V
Cells : 1
The user guideline for charger:
1) Firstly, insert the white plugs of all the batteries into the port of charger completely.While you insert it into the charger , Shake it up and down slightly and insert it into the charger with a little effort.as shown in the picture next to the title.
2) Connect USB cable to supply power(input voltage is 5V and input current is 2A)
3) If you have a notebook or an adapter for iphone or Samsung and so on, you had better connect USB cable to it .Thus , it will work fine
4) while batteries is fully charged and pull the white plug out, Shake it up and down slightly and pull it out from the charger with a little effort.as shown in the picture next to the title
It is important to notice that the light of charger will go out while the batteries is fully charged.Therefore, the light isn't bring while you are charging batteries, In particular, you have just received your favorite item from express.Don't be angry.Maybe batteries are full.In addition, If you need more detail instruction, Please be free to contact me by email.I will explain it in detail.Thanks!
- Model number:3.7v 1000mah 20C lipo battery built in protection IC and X5 charger
- Charger Voltage input: DC 5V; Voltage output: 4.2V, Charging 5 battery at one time, Over charge protection, Short circuit protection
- Battery size:51*30*10mm/2.00*1.18*0.39inch
- Suitable for: MJX T04 T05 T25 M03 F28 F29 M1 L1 walkera WLtoys RC Quadcopter
- Notice that the lights of charger will be off while the batteries are charged fully.Therefore, its lights of charger won't bright while the batteries are full