Overview:
This LCD micro-repeater kit includes an outdoor and indoor antenna, suitable for mobile phone signal boosting, presenting good amplification effect with no blind spot, which is widely used at home, office, meeting room and other small places.
Note: Please ensure your phone frequency the same with our repeater before purchase, for different phone may use different frequency.
Features:
* Mini WCDMA2100MHz LCD repeater for mobile phone signal boosting.
* With LCD indicator to show real-time work state.
* ALC function, no interference to work station.
* Low noise, low heat, low power consumption.
* Alloy material, durable in performance.
* Perfect design, easy installation.
Specifications:
Model: WCDMA2100
Material: Alloy
Dimensions: Approx. 6.42*4.09*0.79in / 16.3*10.4*2cm
Frequency Range: Uplink 1920-1980MHz, downlink 2110-2170MHz
Gain: Uplink 65dB, downlink 70dB
Output Power: Uplink 23dBm, downlink 23dBm
Antenna Gain: 5dB outdoor antenna, 3dB indoor antenna
Outdoor Antenna Length: 10m/32.81ft
Connector: N-Female
Impedance: 50Ω
Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.
Unfortunately, there are still some places where one can find themselves “out of coverage”. Usually those places are either too far from the cell phone base
station or located inside underground constructions, for example:
· Parking lots, tunnels
· Big stores, office buildings
· Cars, boats etc.
· House in remote areas etc
How is mobile phone signal booster GSM/DCS/ 2G/3G/4G WORKING
• The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
• After the signal is accepted by the phone amplifier, the device amplifies it.
• Then this amplified signal goes through the connection cable (coax) to the inside antenna.
• And after that, the amplified signal transmits to the cell phone.