New M6 HUD head up display
it displays dates in the front breeze such as driving speed, rpm, fuel consumption, water temperature, voltage; preventing drivers from becoming dangerous because of watching the instrument while driving. drivers can read the driving information instantly, and can always maintain the best state on the road with HUD.
main feature
1. Available for any car with OBD2 port and EUOBD (car diagnostic system auto), easy to install, plug and play
2. Two display mode: reflect on breeze or view directly on the sit up HUD screen
2. 3 inch HD display screen.
3. Multi-color design makes the screen more abundant and easy to read.
5. Nano-technology to eliminate double reflections, clearer.
6. Rich Content: speed, rpm, water temperature, voltage, low voltage alarm, high temperature water alarm, over speed alarm, toggle freely between kilometers & miles.
7. Auto power on / off: HUD switch off and start with the vehicle started and shutdown, effective protection of car battery; keeping the switch mode manual, easier to control HUD.
8. brightness adjustment mode Automatic and manual, steerless.
product description
Model: M6
black color
function: Speed, RPM, Excessive speed alarm, Water temperature, etc.
ambient temperature: -40c- + 80c
atmospheric pressure 86-106KPa
Relative humidity: 10% -95%
ambient noise <= 60dB (A)
alarm sound level: "= 30dB (A)
Operating voltage: 9V ~ 16Vdc (12Vdc / 400mA)
HUD size: 9 * 5.4 * 1.2 (cm)
HUD Weight: 40g
HUD installation:
1. Know your brand vehicle, work for cars with OBDII HUD agreement or EU OBD contract. open the engine hood and find the label below if it has words like OBDII CERTIFIED, then it can be installed.
2. Discover the 16 pin diagnostic connection of the vehicle and connect well with the OBDII connection line.
use and installation for the reflection film:
please Note: panel information projects in front of the HUD car stops because the breeze is double which will cause double reflection on the breezes when it works. The double reflection will be different because of the different windscreen. If you can clearly see the display information, then there is no need to use the reflection movie. if there is a double image, then please use the reflection movie.
first, please put the non-slip mat on the dashboard, and then put HUD on it. Reflection movie can be stick to the position just above the position that can reflect host HUD screen to stops.
methods of pasting the film:
1. Spray a little water over the place that the film will be glued on, and then use a dry cloth to wipe it;
2. Take off the back of the reflection film, glue it to the window glass.
3. Once you have adjusted the location, you can use a scratch board or something flat to slick the film and squeeze the water inside out until there are no bubbles or water in it.
4. Take off the protective film from the reflection film. if the film can not display all the information, please adjust the non-slip mat to move the position