24/7 live video: 360° wide-angle panoramic Lens of view, captures everyting in the field of view.1080P HD no blind area , applicable to different monitoring scenarios, 5 different viewing modes to look after your home, day and night. Night vision is up to 16-feet.
Motion Derection: The csecurity device includs HD live and recored video, Integreted with LED illumination, when any motion is detected, secyurity system will send alert message to you mobile phone via app immediately. Perfect for surveillance.Our camera bulb does not allow Cloud Backup/Recording and doesn't support RTSP.Only support SD card to Record picture/voice.
Remote Control LED light: Dimmable brightness control from anywhere with your phone, using the free app V380S or V380 (works with iOS/Android). Easy installation and APP setup, remoting the camera on smartphone via 4G network or Wifi.
Two- way Intercom: Two-way Audio Communication With the built-in speakers and microphone , you can conduct 2 way communications.Communicate with family, friends and your pets by intelligent android and apple app, talk with them freely by the wifi security camera.
EASY DIY SETUP: Step by step installation videos and phone support for easy setup in 5 minutes. This camera completes wireless solution and wireless connection with wi-fi router.
Specifications:
-Type:IP Camera
-High Definition:1080P(HD)
-Lens (mm):1.29mm, F2.2, 185°fisheye lens
-Sensor:CMOS
-Supported Mobile Systems:iPhone IOS, Android
-Network Interface:Wi-Fi/802.11/b/g
-IR Distance(m):15m
-Power port: E27 / E26 screwed thread
-Audio Output:Speaker
-Power Supply(V):100-240V
-Power Consumption(W):3W
-Viewing Angle (Degree):360Degree
-Working temperature:0-50°C
-Supported SD card: up to 64GB
How to make the camera connect to the internet？
1.Download “V380S” or “V380” from IOS or Andriod APP store or scaning the QR code on the box
2.Electrify the camera by connecting to power source start worling (ndication voice and light will turn on)
3.Connect LAN ( AP mode): Select and connect AP signal(“MV+camera’s ID No”) in phone WLAN, NO Internet Access.
4. Add your device in the APP: Enter “V380S” and click“ Local login” directly, Pull down to refresh or click “+” to add your networked device, When device indicates “LAN online”, can operate the camera int the LAN area
5.Change LAN to WLAN (station mode): Click Setting then “Network settings”, Select “Station mode”, choose a local WIFI signal(NOT SUPPORT 5G WIFI) and put password, click “save”, voice indicating “WIFI’s connected”, your device will connect the Wifi automatically. Then you can use phone though any WIFI or mobile data to remotely operate and monitor.
NOTICE:
�If can not connect WiFi by hot point, please use the reset pin(as accessories) to press the reset hole and hold it until the camera have voice prompt
�LED BULB WITH 360 PANORAMIC CAMERA DOES NOT SUPPORT 5G WIFI NETWORK.
