| Brand | YongNuo | | Model | 460s | | Quantity | 1 piece(s) per pack | | Color | Black | | Material | Plastic | | Compatible Camera Brand | Sony | | Compatible Models | Universal for Sony series | | LED Quantity | 1 | | Color Temperature | 5600 K | | Brightness | No Lumens | | Power Supply | 4 x AA batteries (not included) | | Working Voltage | 6 V | | Power | 6 W | | Other Features | Flash Index 33 Circuit design Automatic Insulated Gate Bipolar Transistor (IGBT) Tilt angle of 0-90 degrees Rotation angle 0-270 degrees left and right Power 4 AA alkaline batteries or other battery Lighting times 100-1500 times (AA alkaline cell used) Recycle time about 5S (using AA alkaline batteries) Color temperature 5600K Flash time 1/800S-1/20000S (depending on the camera may be) Flash adjusts the light quantity control 7 (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64) Power saving function idle for about 3 minutes into standby mode, power is turned off after 30 minutes; Small size, Expand palm size, lightweight about 250 grams, easy to carry, pocket can hold; Index powerful, ISO100 state index 33, ISO200 state index 46. Simple operation, intelligent user interface, functional switching and indexation glance. Full-featured supports multiple smart standby modes, respectively, supports manual flashlight control lead flashing and lead flashing TLL flash pre-flash. Equipped - Base plates and diffuser built-soft, 5600k standard color temperature for portraits, Common SB800 diffuser. Power Management: 1 power on - press the power switch 2S (indicates charging indicator lights red, a few seconds after the switch to green light, which means that you can shoot; If the charging lamp is still red, replace the batteries with new ones); 2 To test flash, press the test button; used up, press the power switch to turn off the power 2S; Shooting Mode: 1 Using reflective subjects - such as that direct light is too strong, the flash head pointing through a wall or ceiling, the flash to illuminate the subject in reflective wall before being shot. This reduces the shadow behind the subject, for more natural photographic results. 2 using soft board shoot - out built soft board, using soft board to create engaging flash, portrait facial expression effect of increasing; 3 shooting with wide-angle diffuser plate - Pull out the wide-angle diffuser plate so that the flash range expanded to 18mm, suitable for special environment; Manual Exposure: 1 adjustment mode to M-file, POWER LEVEL leftmost one light, the output is 1/64. 2, press the right output power gradually, the following order: 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 1/1; Instead, press the "-" left output power gradually smaller. 3, you set the flash mode and flash output power will be maintained until the power off until the restart occurs; Wireless Flash; 1, SLAVE1 (S1) mode - support the routine universal flash light control lead flashing, which provides the light source is not cited flash with TTL pre-flash. 2, SLAVE2 (S2) mode - Support comes with advanced flash TTL functions, including machines with pre-flash function and independence TTL dome lights; Power Saving Mode: 1, the lamp with a power-saving mode, M mode, the power will be in about three minutes without operation automatically after shut down. To open the flash, press any key to turn; 2, in the wireless flash mode (S1 or S2) under idle for 30 minutes will automatically enter power-saving state | | Packing List | 1 x Speedlite flashgun
1 x Carrying pouch
1 x Chinese / English user manual |
|
| |
Dimensions: 6.89 in x 2.83 in x 2.20 in (17.5 cm x 7.2 cm x 5.6 cm)
Weight: 8.82 oz (250 g)
|
| |
|
