Brand | Jtron | Model | 03100400 | Quantity | 1 piece(s) | Material | Aluminum alloy housing + electronic components | Color | Golden | Function | The output voltage: 12V DC (general car output voltage); Power: 50W; Resistance: 8 Ohms; Function Description: Original car steering light after replacing the LED turn lights, because the LED turn signal power is much smaller than the original car, there will be rapid flashing turn signal frequency phenomenon, the simple solution is to replace the turn signal flasher, but can not find some friends to the right or the original car flasher turn signal flasher is integrated, can not simply be replaced, you can only install an external resistor to address decoding, the installation is in parallel with the LED lights, that is connected to the turn signal lights into the line on. Note: Be sure to do a good job when installing heat resistance and install a solid, recommended method is to coat the bottom of the heat resistance adhesive metal parts in the car, and then on the screws, so that not only can heat metal parts, very stable. (Of course, only suggested, not required) resistance operates at high temperatures, pay attention not to have resistance around the heat-sensitive components, not a hand to touch, to avoid burns. | Packing List | 1 x Decoding resistor (Both ends of the line length: 14cm, 14cm) 2 x Quick splice wire connectors (Red) |
|
|
Dimensions: 2.01 in x 0.91 in x 0.63 in (5.1 cm x 2.3 cm x 1.6 cm) Weight: 1.41 oz (40 g)
|
|
|