VING series camera flash (V flash) is the world first rechargeable Lithium-ion powered hotshoe strobe. As a manual flash, V860N uses lithium-ion polymer battery instead of AA-sized batteries and external power pack. This brings three advantages: fast recycle time, more flash times, and convenience. V860N is an all manual flash specially for Nikon camera and support i-TTL functions.
Fast, Durable, Stable: 2000mAh LiPo battery provides 1.5 recycle time at max. power and 650 full power pops. During the 200th to 650th fire in tests, recycle time can stay stably between 2 to 4 seconds. Thousands of low-output flashes never activate overheat. Only after 30 full power flashes, does overheat occur.
Real-time Battery Level: get to know the remaining battery level in two ways: one from the LCD panel on the flash, second from the battery charger. Get the real-time battery level before out for a shooting task.
Super Value: Forget the heavy burden and messy battery charging and handling. No need with four AA’s in the speedlites, four in the external battery pack, and four as backup. No multiple chargers or cables. Only one VING Li-ion battery and a charger is it. Accumulative costs on AA batteries saved after all. Less money for more benefit.
1/8000s HSS - HSS capability (up to 1/8000s) on or off camera;
Master & Slave Flash - As master flash to trigger Canon speedlites SB-900, SB-910, etc in TTL or M mode - As slave flash to receive wireless commanders of Nikon cameras e.g. D7100, D7000, D90, etc and Nikon speedlite signals;
i-TTL II Auto Flash - Supporting Nikon DSLRs, i-TTL II compatible flash helps easily achieve correct exposure;
Full TTL Functions - Support FEC, FE Lock, Rear Curtain Sync, Modeling Flash, Control with Camera’s Menu Screen, etc.;
Powerful Li-ion Battery - 1.5s recycle time at max. power & 650 full power pops - Forget AA batteries’charging preparation and carrying burden;
58 Guide Number - GN58 (m ISO 100 @ 105mm) with TTL/M/Multi/S1/S2 modes - Auto/Manual zoom (24-105mm) with correct auto focus assist - Allow for USB firmware update and custom function settings