NOTES:

1. Do not disassemble products, many of internal power supply wires are linked to each other; If not a professional person, it is easy to result in a loss of function;

2. New product should be fully charged before using; We just charge it with saturated capacity, which can only play a protective and long-term storage effect. The first full charging is in order to activate the charging capacitor inside; If over-discharge when low power, it may cause the capacitor closed, then it should be returned for re-activating the inside panels;

3. If you do not use after purchasing or in doubt for a feature, please read our detailed instructions; If you still can not solve your problem, please call our factory, we have the person here to answer your questions;

4. Do not overcharge for too long time, must keep it within six hours; Although our products have overcharge protection, but overcharging often will accelerate the aging of the wires and reduce the product life; A serious problem will cause a short circuit.

5. When not in use, remove the battery clip and charger on the product, so as to maintain the product and the external wires are cut off; If not in use for a long time, keep the product at least one third of the power; If the ground beam is too low, please charge it one or two hours, then place it in box for storage.

6. The product must be stored in a dark, dry environment; It should be stored at room temperature. Do not store in cold or hot place, which will reduce its life.