This power board adopts imported electronic components and international advanced technology, strong anti-interference performance, stable and reliable; Suitable for using for communicating between buildings, all door access controllers, especially suitable for driving all kinds of electric locks.
AC input: standard AC 220V, 50Hz
DC output: No-load output: DC 12~14V / 2000mA, constant voltage output: DC 12V / 1000mA
With time delay control circuit, unlocking time is adjustable between 0~15s
Outside dimension: 182 x 82 x 73mm
Weight: 1.2kg
Output terminals wiring instruction:
1-3: NO & COM: Normal open without output; Output DC 12V after button is triggered (delay: 1~15s, 1: positive, 3: negative)
2-3: NC & COM: Normal close output DC 12V; Power off after button is triggered (delay: 1~15s, 2: positive, 3: negative)
4-5: Output DC 12V, 4: positive, 5: negative
5-6: Input end of door open button, can be connected to the door access controllers controlled by on-off output (relay output)
7-8: Input 12V to open the door, special for the door access controllers controlled by voltage output directly
Note: Must adjust the delay to 0s when connecting to an electric lock, to avoid burning the lock.