One-key to match, there is no need to do some settings. Devices which already did matching don’t need to match next time. With power on, you can use it directly (the are all matched when leave factory).
[email protected] no compression and no delay transmission, which is suit for all kinds of game, such as Need for Speed.
The longest straight line wireless transmission could be up 10 meter.
The front of TX and RX is facing, and there is no obstruction between them, then the transmission effect is the best.

Note
1. It works in the uncongested 60 GHz frequency band. The front of TX and RX is facing, and there is no obstruction between them, then the transmission effect is the best.
2. TX and RX should be matched to use, when you make the TX and RX to restore factory setting, it will complete matching automatically.
3. There's no software required - all you have to do is plug the transmitter and receiver directly into your device's HDMI ports and you're immediately connected.

Features
1. Support HDMI 1.4a version.
2. Support 3D video format.
3. Support HDCP1.4.
4. Support the highest resolution up to 1920x1080/60Hz.
5. Support the highest rate 1.485G and TMDS clock up to 148.5Mhz.
6. Support uncompressed transmission.
7. Working in the 60 GHz frequency band, it is not subject to interference by WiFi signals, microwave radiation, or cordless phones.
8. The longest distance can be 10m when the resolution is 1080p.
9. 5V/1A power adaptor.

Connection and Operation
1. Connect the HD source to the input of the wireless extender TX with 1 hdmi cable.
2. Connect the output of the wireless extender RX to the displays with 1 hdmi cable.
3. Connect 5V/1A power adapter to the TX and RX.
4. Reset button: it’s a reset key for system reset，you can press the button for about 10 seconds to restore factory Settings.