Miimall MW-700 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit
Miimall - Help You Build a Audio & Video World with Innovation
With multiple locations over three continents, Miimall focuses on photography, video, and music equipment. We are committed to offering professional premium products to photographers, videographers, music lovers all over the world.
Specification:
Microphone---
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity: 45dB±1dB
Output Impedance: 1500Ω±30%(at 1kHz)
Load Impedance: ≥1000 Ω
Equivalent Noise Level: 16dBA
Electrical Current: 3mA
Microphone Output Interface: 3.5mm (0.14 Inch)
Usage Voltage: 48V phantom power supply
Wire: 3.5 inserted audio interface, 3 meters long
Microphone Body Weight: 0.51lb
Size: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)
Microphone Material: Steel net + Zinc alloy hand holding part
Pop Filter---
External Diameter: 155mm(6.10inch)
Function: Reduce P-pops in recording
Double-layer Net Diameter: 130mm(5.12inch)
Tube Length: 375mm(14.76inch)
Tube Diameter: 8mm(0.31inch)
Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)
Flexible Holder: 360 degree swivel mount
Stand---
Material: Steel
Arm Stand Weight: 850g(1.87lb)
Each Arm: 36cm(14.1inch)
Arm Stand Support: Up to 2kg(4.41lb)
Double-braced Arms: Add strength
Features: Stable, tough, and affordable
Steel Construction: 9x9mm(0.35x0.35inch) cross-section
Mount Base: Installed onto the desk up to 55mm(2.17inch) thickness
Mount on: announcers’ desk with the metal mounting base
XLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing
Microphone Shock Mount---
Material: Steel Metal
Fits for mic of 43-46mm Diameter.
Isolate mics from physical vibration, floor, and stand noise.
Feature an angle adjustment with locking knob.
Foam insert to hold and protect microphone.
Note:
1.The microphone can not be used with mobile phone and tablet computer. Note: It cannot work with Mac.
2.If you want better sound effect, a sound card should be used. (Sound Card is not included).
3.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
4.If your device could not provide enough power (when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.
5.The Condenser Microphone only works with the device that could provide enough power (Voltage Required: 5V) for it:
6.When connected with desktop computer, the Mic could be used alone;
7.When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
Package Included:
1x Miimall MW-700 Professional Studio Broadcasting Recording Condenser Microphone
1x Shock Mount
1x Anti-wind Foam Cap
1x Microphone Pop Filter Wind Screen
1x Arm Stand Body
1x Clip
1x Mounting Base
1x Screw Nut
1x XLR Male to XLR Female Cable
1x 3.5 mm AUX Audio Cable Splitter
1x User Manual
Miimall MW-700 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit
Miimall - Help You Build a Audio & Video World with Innovation
With multiple locations over three continents, Miimall focuses on photography, video, and music equipment. We are committed to offering professional premium products to photographers, videographers, music lovers all over the world.
Specification:
Microphone---
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity: 45dB±1dB
Output Impedance: 1500Ω±30%(at 1kHz)
Load Impedance: ≥1000 Ω
Equivalent Noise Level: 16dBA
Electrical Current: 3mA
Microphone Output Interface: 3.5mm (0.14 Inch)
Usage Voltage: 48V phantom power supply
Wire: 3.5 inserted audio interface, 3 meters long
Microphone Body Weight: 0.51lb
Size: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)
Microphone Material: Steel net + Zinc alloy hand holding part
Pop Filter---
External Diameter: 155mm(6.10inch)
Function: Reduce P-pops in recording
Double-layer Net Diameter: 130mm(5.12inch)
Tube Length: 375mm(14.76inch)
Tube Diameter: 8mm(0.31inch)
Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)
Flexible Holder: 360 degree swivel mount
Stand---
Material: Steel
Arm Stand Weight: 850g(1.87lb)
Each Arm: 36cm(14.1inch)
Arm Stand Support: Up to 2kg(4.41lb)
Double-braced Arms: Add strength
Features: Stable, tough, and affordable
Steel Construction: 9x9mm(0.35x0.35inch) cross-section
Mount Base: Installed onto the desk up to 55mm(2.17inch) thickness
Mount on: announcers’ desk with the metal mounting base
XLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing
Microphone Shock Mount---
Material: Steel Metal
Fits for mic of 43-46mm Diameter.
Isolate mics from physical vibration, floor, and stand noise.
Feature an angle adjustment with locking knob.
Foam insert to hold and protect microphone.
Note:
1.The microphone can not be used with mobile phone and tablet computer. Note: It cannot work with Mac.
2.If you want better sound effect, a sound card should be used. (Sound Card is not included).
3.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
4.If your device could not provide enough power (when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.
5.The Condenser Microphone only works with the device that could provide enough power (Voltage Required: 5V) for it:
6.When connected with desktop computer, the Mic could be used alone;
7.When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
Package Included:
1x Miimall MW-700 Professional Studio Broadcasting Recording Condenser Microphone
1x Shock Mount
1x Anti-wind Foam Cap
1x Microphone Pop Filter Wind Screen
1x Arm Stand Body
1x Clip
1x Mounting Base
1x Screw Nut
1x XLR Male to XLR Female Cable
1x 3.5 mm AUX Audio Cable Splitter
1x User Manual
